| 1 | Compact machine controller | 7 in; 1024 × 600 or higher | Projected-capacitive touch; check glove compatibility if needed | Entry-level processor; 4–8 GB RAM; solid-state storage | Ethernet, USB, serial port as required by the controller | Confirm whether IP65 applies to the front or the complete unit | Small machines and local operator controls |
| 2 | Compact HMI for washdown-adjacent areas | 10.1 in; 1280 × 800 or higher | Projected-capacitive or resistive touch; select for the operator’s gloves and workflow | Entry- to mid-level processor; 8 GB RAM target | Ethernet, USB, serial; sealed connectors may be needed | Verify the complete installation, including connectors, seals, and mounting cutout | Packaging lines and compact process stations |
| 3 | General-purpose factory HMI | 12.1 in; 1280 × 800 or higher | Touch type selected for wet, gloved, or dry operation; anti-glare option where useful | Mid-level processor; 8–16 GB RAM target | Dual Ethernet preferred for network separation; USB and serial as needed | Request the IEC 60529 test scope and installation conditions | Machine status, recipe entry, and production monitoring |
| 4 | Standard-size operator terminal | 15 in; 1024 × 768 or higher | Touchscreen with a viewing angle suited to the mounting position | Mid-level processor; 8–16 GB RAM target | Ethernet, USB, serial, and optional fieldbus interface | Check front-panel gasket compression and enclosure rating after installation | Production cells and equipment control panels |
| 5 | Widescreen machine interface | 15.6 in; 1920 × 1080 | Projected-capacitive touch; assess reflections and viewing distance | Mid-level processor; 8–16 GB RAM target | Dual Ethernet, USB, and display or serial interfaces as required | Confirm the rating for the selected display, bezel, and mounting method | Dashboards and applications with side-by-side process views |
| 6 | Legacy-panel replacement | 17 in; 1280 × 1024 or higher | Touch or non-touch; match the existing cutout and operator workflow | Mid-level processor; memory sized for the operating system and application | Serial and legacy I/O may be important; confirm connector compatibility | Verify dimensions, gasket design, and cable entry against the cabinet | Modernization of existing production equipment |
| 7 | Large-format process overview | 18.5 in; 1366 × 768 or higher | Wide viewing angle; touch optional depending on the control-room workflow | Mid-level processor; 8–16 GB RAM target | Dual Ethernet and multiple USB ports; check expansion needs | Specify the required protection for the actual environment, not just the display face | Process visualization and overview stations |
| 8 | High-resolution operator station | 19 in; 1280 × 1024 or higher | Touch or non-touch; choose based on interface layout and viewing distance | Mid- to upper-level processor; 16 GB RAM target for heavier applications | Dual Ethernet, USB, serial, and optional expansion | Ask whether IP65 is achieved with all covers and accessories installed | Complex HMI screens and multi-panel applications |
| 9 | Full HD production dashboard | 21.5 in; 1920 × 1080 | Projected-capacitive touch or non-touch; consider glare and viewing distance | Mid- to upper-level processor; 16 GB RAM target | Dual Ethernet, USB, and optional wireless connectivity if permitted by site policy | Confirm documented IP rating and any limits on cleaning methods | Line dashboards, traceability, and production reporting |
| 10 | Large multi-view industrial workstation | 24 in; 1920 × 1080 or higher | Touch optional; ensure the mounting position supports comfortable operation | Upper-level processor; 16 GB RAM or more according to workload | Dual Ethernet, several USB ports, and expansion options where required | Check the complete enclosure rating, heat dissipation, and mounting requirements | Large process screens and information-dense operator stations |