| Carbon black-filled rubber | Conductive carbon black dispersed in an elastomer | 100–106 | Widely used; performance depends on carbon-black grade, loading, dispersion, and rubber compound. | ESD parts, seals, rollers, gaskets, and antistatic components |
| Graphite-filled rubber | Natural or synthetic graphite particles | 10-1–104 | Can provide electrical conductivity and lubricity; particle alignment and loading affect results. | Conductive seals, contacts, and static-dissipative components |
| Carbon-fiber-filled rubber | Short or milled carbon fibers | 10-2–103 | Fiber orientation and length can make conductivity directional; consider flexibility and surface finish. | Antistatic components, conductive gaskets, and specialty molded parts |
| Carbon-nanotube-filled rubber | Single-wall or multi-wall carbon nanotubes | 10-2–106 | Low filler levels may form conductive networks, but dispersion and processing strongly influence performance. | Flexible sensors, ESD components, and conductive elastomer parts |
| Graphene-filled rubber | Graphene or graphene nanoplatelets | 10-2–105 | Electrical and mechanical properties depend on platelet quality, dispersion, and compound design. | Conductive sheets, flexible components, and research or specialty applications |
| Nickel-coated graphite-filled rubber | Graphite particles with a nickel coating | 10-3–102 | Combines a conductive coating with a graphite core; check corrosion resistance and shielding requirements. | EMI shielding gaskets and conductive seals |
| Silver-coated particle-filled rubber | Silver-coated glass or other particle substrates | 10-4–101 | Can offer high conductivity; evaluate cost, coating integrity, and environmental exposure. | Electrical contacts, EMI shielding, and high-conductivity seals |
| Silver-filled rubber | Silver powder, flakes, or a combination of particle shapes | 10-4–101 | Often selected where low resistance is important; typically has a higher material cost than carbon-filled grades. | Conductive contacts, connector seals, and EMI shielding gaskets |
| Nickel-filled rubber | Nickel powder or flakes | 10-3–102 | Consider particle loading, corrosion environment, flexibility, and the required shielding performance. | EMI shielding seals and conductive enclosures |
| Conductive-polymer-filled rubber | Conductive polymer particles or blends, such as polyaniline or polypyrrole | 100–108 | Properties vary substantially with polymer chemistry, humidity, formulation, and processing. | Static-dissipative parts, flexible electronics, and specialty sensors |