| Fishing rods | Carbon-fiber or fiberglass composites; metal guide frames; cork, EVA foam, or molded polymer handles | Composite blanks are formed and cured, then fitted with guides, reel seats, handles, and finishing components. | Length, power, action, line rating, lure rating, blank material, guide configuration, handle design, and target fishing method | Check straightness, guide alignment, joint fit, finish consistency, and performance against the agreed flex and load specifications. |
| Fishing reels | Aluminum alloys, engineering polymers, stainless steel, brass, and other corrosion-resistant metals | Parts may be die-cast, machined, molded, stamped, or assembled; gears, bearings, drag systems, and handles are fitted and tested. | Reel type, gear ratio, retrieve direction, line capacity, bearing configuration, drag rating, body material, and saltwater-use requirements | Test smoothness, gear engagement, drag consistency, handle security, spool alignment, and operation after exposure to the specified conditions. |
| Hooks and terminal tackle | High-carbon steel or stainless steel; finishes may include plating or protective coatings. | Wire is formed, points are shaped, hooks are heat-treated, and finishes or barbs are applied according to the design. | Hook style, size, wire gauge, point and barb design, coating, corrosion resistance, and applicable destination-market requirements | Inspect point sharpness, dimensional consistency, coating coverage, rust resistance, and strength using an agreed test method. |
| Fishing line | Nylon monofilament, fluorocarbon, and braided high-strength polyethylene fibers | Line is extruded or fiber-braided, then wound onto spools and labeled with the agreed specifications. | Line type, diameter, breaking strength, length per spool, color, stretch characteristics, knot performance, and packaging | Verify diameter and breaking strength with agreed sampling procedures; check spool length, winding quality, and label accuracy. |
| Lures and baits | Hard plastics, soft PVC or other elastomers, wood, metal, paint, hooks, and connecting hardware | Depending on the design, components may be molded, machined, painted, printed, assembled, and fitted with hooks or split rings. | Lure type, dimensions, weight, color, buoyancy or sinking behavior, hook configuration, materials, and packaging | Check finish and assembly, confirm weight and dimensions, and test swimming or action characteristics against an approved sample. |
| Landing nets and fishing tools | Nylon or polyester mesh; aluminum or stainless-steel frames; molded polymer, metal, or composite handles | Mesh is cut and joined to frames; handles and tool components are formed, assembled, and finished. | Net opening and mesh size, handle length, frame dimensions, material, folding design, corrosion resistance, and intended use | Inspect seams, frame joints, handle locks, moving parts, surface finish, and resistance to the handling conditions specified by the buyer. |