| Portrait rectangular banner | Tall rectangle with straight sides and a straight or reinforced lower edge. | Vertical flagpole with a fabric sleeve or pole pockets; the pole can be fitted to a ground spike or weighted base. | Storefronts, event entrances, outdoor promotions, and wayfinding. | Uses vertical space effectively. Select a base suited to the surface and expected wind conditions. |
| Landscape rectangular banner | Wide rectangle, with width greater than height. | Horizontal support pole, crossbar, wall brackets, or a tensioned line, depending on the banner construction. | Fences, building fronts, railings, and event barriers. | Requires support along the top edge to help keep the fabric open and readable. |
| Single-sided rectangular flag | Rectangular fabric panel printed on one side; the design may be visible through the fabric from the reverse, usually in mirrored form. | Flagpole sleeve or edge attachment; commonly paired with a compatible portable base or fixed pole. | Short-term outdoor advertising, festivals, sporting events, and temporary displays. | Typically lighter than a double-sided construction. Check how the artwork appears from the reverse before ordering. |
| Double-sided rectangular flag | Two printed fabric panels with an opaque or light-blocking layer between them. | Flagpole sleeve or reinforced edge attachment, with a base or bracket suited to the pole system. | Locations where people approach from both directions, such as walkways, entrances, and street-facing displays. | Provides a separate readable image on each side but is generally heavier than a single-sided version. |
| Ground-mounted rectangular banner | Usually a portrait rectangle attached to a flexible pole system. | Ground spike for suitable soil; a cross base or weighted base is commonly used on hard, level surfaces. | Outdoor events, lawns, parking areas, and temporary roadside displays where permitted. | Choose the base for the installation surface. A portable base does not remove the need to assess wind exposure. |
| Wall- or fence-mounted rectangular banner | Portrait or landscape rectangle, often finished with a sleeve, hems, or attachment points. | Wall brackets, rails, grommets, or ties attached to a suitable structure. | Building façades, fences, storefronts, and indoor exhibition walls. | Confirm that the mounting surface and fixings can support the banner, and allow for wind loading outdoors. |
| Vehicle-mounted rectangular flag | Compact portrait rectangle designed for a vehicle-compatible pole and mount. | Purpose-made vehicle mount attached to an appropriate vehicle fitting. | Stationary displays at rallies, outdoor events, and promotional parking areas. | Use only a secure, compatible mount. Remove or stow the banner before driving unless the equipment is specifically approved for use in motion. |