| Typical application | Vans and small insulated bodies | Medium rigid trucks | Large rigid trucks and semi-trailers | Recommended unit model for body volume, insulation, payload, door-opening frequency, and route climate |
| Indicative cooling-capacity class | Approximately 1–5 kW | Approximately 5–12 kW | Approximately 10–20+ kW | Capacity at stated ambient and box temperatures; ask for separate data at fresh and frozen setpoints |
| Capacity test conditions | Must be stated; results vary with ambient temperature and setpoint | Must be stated; compare like-for-like conditions | Must be stated; larger systems may use different drive configurations | A test report showing ambient temperature, return-air temperature, engine speed or electrical input, and measurement method |
| COP reporting | Not comparable without matched test conditions | Not comparable without matched test conditions | Not comparable without matched test conditions | COP definition, cooling output, power-input boundary, test standard, and operating point; avoid comparing figures measured under different conditions |
| Temperature range | Application-dependent; chilled and frozen-duty models differ | Application-dependent; confirm pull-down performance at the target setpoint | Application-dependent; confirm capacity at low-temperature operation | Minimum setpoint, pull-down time, temperature stability, and performance at high ambient temperature |
| Power and drive options | Vehicle-engine-driven or electric options, depending on model | Engine-driven and electric configurations are available in the market | Engine-driven, standby-electric, or other configurations, depending on application | Drive type, electrical requirements, standby capability, fuel or energy consumption, and installation compatibility |
| Service-network comparison | Coverage varies by supplier and destination market | Coverage varies by supplier and destination market | Coverage varies by supplier and destination market | Local service locations, technician availability, parts stock, response hours, and written support arrangements |
| Warranty and parts support | Terms are supplier- and market-specific | Terms are supplier- and market-specific | Terms are supplier- and market-specific | Warranty duration and exclusions, parts lead times, claim process, and availability of service manuals |
| Recommended evaluation evidence | Model-specific technical data | Model-specific technical data and installation references | Model-specific technical data and fleet-duty references | Current datasheet, test report, compliance documents, installation guidance, and destination-market service contacts |